前止水功能后擋水機櫥柜后擋水磨邊機石英石櫥柜后擋水設備 multi-function quartz stone arc-edge machine

本設備結合市場上各類型號后擋水設備優點，改進設計而成。功能齊全操作方便、運行平衡、無振動、噪音低等優點，投放市場后得到到各廠家的一致好評。該機可對后擋水條進行弧面或45度斜面進行加工，加工的后擋水條質量十分完美。后擋水條連拋帶磨一分鐘一米，加工出來的r角光亮度可達到90°以上，可任意調r角弧度，加工成本極低。用于廚房臺面工程效果更佳、更顯著。主要功能:修邊、磨圓弧、倒角、拋光等功能。在后擋水設備的基礎上增加了前止水功能。

The equipment combined with the advantages of different types on the market after improvement and design.full function,easy operation,balanced running,no shaking and low noise. Has been put on the market, all the manufacturers speak highly of it. The machine can be used for processing cambered surface an 45 degrees cant. The processing quality is perfect . the machine grinding a meter per minute while polishing. The light of R angle can reach more than 90 degrees after polishing. You can adjust R angle arc arbitrarily . also , the processing cost is axtremely low. Ti is better applied in kitchen table and more significant. Main functions : trimming,circular arc , chamfering , polishing etc.

主要技術參數：

Working speed工作速度：0.4-1.5m/min

Working thickness工作厚度：6-30mm

Working width 工作寬度：30-650mm

Transmission motor傳動電機功率：0.55KW

Total power總功率：10.85KW

Equipment dimension 設備尺寸：3500*1900*1500mm

加工要求不一樣，一般是60-80米1/4R后擋水條

快的也是100米左右 8個小時算

后擋水設備平均一分鐘連磨帶拋光是1分鐘1米 一個小時就是60米 8小時間算480米

4個工人 ＝＝ 1臺設備