箱式生態景觀護坡模具宏旭生態景觀護坡模具規格尺寸

箱式生態景觀護坡模具的介紹主要是依據具體圖紙進行生產，箱式生態景觀護坡模具尺寸為200*100*50厘米的，仿石花紋設置需要使用硬度比較大的材質進行專門的塑造，其他材質的使用多次后容易開裂。常規箱式生態景觀護坡模具的制造在一般小型廠家無法完成，單純鋼模板的重量就達到了600公斤以上，而每套模板需要保證使用600次以上，所以對于制作技術要求非常高。在階梯式護坡一起使用的里面還有平鋪式生態護坡。為什么稱之為階梯式呢？從實體鋪設的階梯式護坡預制件上可以看出，這種預制件是層層搭在一起的，呈現臺階的形式，所以稱之為階

The introduction of the box type ecological landscape slope protection mold is mainly based on the specific drawings. The box type ecological landscape slope protection mold size is 200 * 100 * 50cm. The stone like pattern setting needs to use the material with relatively large hardness for special shaping, and other materials are easy to crack after being used for many times. The manufacturing of the conventional box type ecological landscape slope protection mould can not be completed in the general small-scale manufacturers. The weight of the simple steel formwork is more than 600 kg, and each set of formwork needs to be used more than 600 times, so the technical requirements for the production are very high. There is also a tiled ecological slope protection in the stepped slope protection. Why is it called ladder? It can be seen from the prefabrication of stepped slope protection that the prefabrication is built layer by layer and presents the form of steps, so it is called steps